Kvik SH060, Руководство по сборке, Страница: 64 / 82

Installing Cisco Prime Network Registrar in a Lab
To install Cisco Prime Network Registrar on a single machine for evaluation purposes:
Step 1 Check whether the machine has enough disk space to accommodate two separate installations of Cisco Prime Network
Registrar.
Step 2
Install or upgrade the local cluster on the Linux machine, according to the procedures in Installing Cisco Prime Network
Registrar, on page 17 . Specify the Local cluster installation.
Step 3 Install or upgrade the regional cluster on the same machine, according to the same procedures. Specify the Regional
cluster installation.
Testing the Lab Installation
To test the installation:
Step 1 Start and log in to the web UI for the local cluster, using the URL appropriate to the port number. By default, the local
port numbers are
8080 for HTTP connections and 8443 for HTTPS (secure) connections.
Step 2 Add DNS zones and DHCP scopes, templates, client-classes, or virtual private networks (VPNs) as a test to pull data to
the regional cluster.
Step 3 Start and log into the web UI for the regional cluster, using the URL appropriate to the port number. By default, the
regional port numbers are
8090 for HTTP connections and 8453 for HTTPS (secure) connections.
Step 4
Test the regional cluster for single sign-on connectivity to the local cluster. Try to pull DNS zone distributions, DHCP
scopes, templates, client-classes, or VPNs from the local cluster to the regional replica database.
Uninstalling in a Lab Environment
If you need to uninstall Cisco Prime Network Registrar, follow the procedure in Uninstalling on Linux, on
page 38 .
No option exists to uninstall only the regional or local cluster in a dual-mode installation environment.
Cisco Prime Network Registrar 9.1 Installation Guide
58
Lab Evaluation Installations
Installing Cisco Prime Network Registrar in a Lab