Kvik SH060, Руководство по сборке, Страница: 39 / 82

Starting and Stopping Servers on Windows
To start and stop servers on Windows:
Step 1 Choose Start > Settings > Control Panel > Administrative Tools > Services .
Step 2 From the Service list, choose
Network Registrar Local Server Agent
or
Network Registrar Regional Server Agent
.
Step 3 Click Restart or Stop , as required, and then click Close .
Starting and Stopping Servers on Linux
In Linux, the Cisco Prime Network Registrar servers automatically start up after a successful installation or
upgrade. You do not need to reboot the system.
To start and stop Cisco Prime Network Registrar when running as nradmin , you must log into the server
as a user in the nradmin group (or root). It is not possible to login as nradmin.
#/opt/nwreg2/local/bin/cnr_service start
#/opt/nwreg2/local/bin/cnr_service stop
Note
To start and stop servers on Linux:
Step 1 Log in as superuser.
Step 2 Start the server agent by running the nwreglocal or nwregregion script with the start argument:
# /etc/init.d/nwreglocal start
for the RHEL/CentOS 6.x local cluster
# systemctl start nwreglocal
for the RHEL/CentOS 7.x local cluster
# /etc/init.d/nwregregion start
for the RHEL/CentOS 6.x regional cluster
# systemctl start nwregregion
for the RHEL/CentOS 7.x regional cluster
Step 3 Enter the cnr_status command to check that the servers are running:
# install-path/usrbin/cnr_status
Step 4 Stop the server agent by running the nwreglocal or nwregregion script with the stop argument:
Cisco Prime Network Registrar 9.1 Installation Guide
33
Next Steps
Starting and Stopping Servers on Windows