Kvik SH060, Руководство по сборке, Страница: 35 / 82

To move an existing Cisco Prime Network Registrar installation to a new machine:
Step 1 Stop the server agent on the old regional server:
• Windows:
net stop nwregregion
• Linux:
# etc/init.d/nwregregion stop
Step 2 Zip up the data directory on the old regional server.
Step 3 Copy the zip file over to the same location on the new server and unzip the file.
Step 4 Install Cisco Prime Network Registrar (regional cluster) on the new server. For more information, see Installing Cisco
Prime Network Registrar, on page 17 .
The installation will detect an upgrade and will do so based on the copied data. This procedure preserves your original
data from the old regional server.
When you install Cisco Prime Network Registrar on the new machine, you must choose the data directory on
which you have copied the data from the old regional server.
Note
Step 5 Start the Cisco Prime Network Registrar web UI or CLI. For more information, see Starting Cisco Prime Network
Registrar, on page 31 .
Step 6 Log in as superuser to the CLI for the new regional cluster.
Step 7 To list the local clusters:
nrcmd-R>cluster listnames
Step 8 To synchronize the data as well as the license information:
nrcmd-R>cluster <name of local cluster> sync
Troubleshooting the Installation
The Cisco Prime Network Registrar installation process creates a log file, install_cnr_log, in the Cisco Prime
Network Registrar log file directory. For upgrades, one additional log file is created: lease_upgrade_log. The
log directory is set to these locations by default:
• Windows:
◦ Local cluster: C:\NetworkRegistrar\Local\logs
◦ Regional cluster: C:\NetworkRegistrar\Regional\logs
• Linux:
◦ Local cluster: /var/nwreg2/local/logs
◦ Regional cluster: /var/nwreg2/regional/logs
Cisco Prime Network Registrar 9.1 Installation Guide
29
Installing and Upgrading Cisco Prime Network Registrar
Troubleshooting the Installation