Parking and storage
75
Parking and storage
Safety
Park on a firm, even surface
Park the plow on a firm and level surface.
Parking and
storage
Parking
> Put the plow into the higher position.
> Set the pressure of the hydraulic automatic release system [+] to
100 bar (1450.4 psi) to prevent gas leakage in the accumulator.
> Use the support stand
> Park the plow
> Disconnect the plow from the tractor
> Lubricate all parts which are in direct contact with the ground. Use
only biodegradable oil and grease.
> When storing the plow, carry out all necessary maintenance.
Plow with Eco-
plowshare [+]
When the plow is equipped with an Eco-plowshare only on the last
body
> Remove the plowshare before parking
> Park in the normal manner
or
> Extend the parking stand by 10 cm (4 inches)
> Place a 10-cm (4 inches)-high block of wood under the first body
> Park the plow
When the plow is equipped with an Eco-plowshare on all bodies
> Extend the parking stand by 10 cm (4 inches)
> Park the plow
Storage
The plow is equipped with components made of plastic and rubber,
and should therefore be kept away from direct sunlight during long-
term storage. This particularly concerns mouldboards on bodies and
skims, and also wheels.
\
WARNING
Parking stand
Use the parking stand when parking the plow. If the plow is not
properly supported, it may tip over. This may damage the plow or
lead to injury.
Higher position
Use the support stand
Содержание ES
Страница 9: ...Safety 9 ...