Kverneland ES, Руководство оператора

Страница: 61 / 82

Care and maintenance
61
Replace Quick-fit
points
Removing a worn point
> Place the gore tool
> Knock the point out with an appropriate hammer.
Fitting a new point
> Place the point in front of the share an move it backwards
> Use the gore tool as a buffer between the point and the hammer
> Knock the point into place
T
IP
! There must be no paint on the angled surfaces
T
IP
! Rotating the Quick-fit points.
When the Quick-fit points are approximately 50% worn, they can be
moved from the body on the right-hand side to the left. This gives bet
-
ter penetration.
Replace Knock-
on
®
points
Removing a worn point
> Place the gore tool
> Knock the point out with an appropriate hammer.
\
WARNING
Wear eye protection
•
Wear eye protection when replacing Quick-fit points. Other -
wise, there is a risk that splinters from the Quick-Fit points can
cause eye damage.
\
WARNING
Wear eye protection
•
Wear eye protection when replacing Knock-on® points. Other -
wise, there is a risk that splinters from the Knock-on® points
can cause eye damage.