Kverneland CLC PRO Скачать руководство пользователя | Manualshive

Страница: 6 / 98

background image

Safety

6

Note for the manager:

As required by law, you should regularly inform those working on the
machine of the existence of safety instructions.

NOTE

This symbol indicates the presence of technical and operational
information regarding personal safety around the machine.

\

SAFETY PRIORITY

The “Safety priority” symbol is used in this manual and on the
pictograms placed on the machine in order to warn the user of the
presence of a risk of bodily injury. Read these instructions closely.
It is essential that you read these instructions and the safety
guidelines before assembling or using the machine.

\

HAZARD

The warning term HAZARD warning indicates an extremely
hazardous situation, which if not avoided will lead to death or
serious injury.

\

WARNING

The warning term WARNING indicates a potentially hazardous
situation, which if not avoided could lead to death or serious injury.
The hazards identified by the term WARNING present a lower risk
of death or injury than those associated with the term HAZARD.

\

CAUTION

The warning term CAUTION indicates a potentially hazardous
situation, which if not avoided could lead to more minor or
moderate injuries. The term CAUTION may also be used as a
means of notification against hazardous practices, which in certain
situations can cause injury.

«
...
4
5
6
7
8
...
»

Содержание CLC PRO



































































































Отзывы:

Нет отзывов

Похожие инструкции для CLC PRO

Бренд: DAKO Страницы: 25

Бренд: 3M ESPE Страницы: 50

Бренд: VACGEN Страницы: 13

Бренд: Yamaha Страницы: 46

Бренд: PAT Страницы: 44

Бренд: Park Tool Страницы: 4

Бренд: Park Central Страницы: 20

Бренд: Qlight Страницы: 4

Бренд: VADDIO Страницы: 58

Бренд: rbd instruments Страницы: 18

Бренд: Gastrodomus Страницы: 22

Бренд: Bestway Страницы: 6

FOT-930 MaxTester

Бренд: EXFO Страницы: 8

Бренд: GLP Страницы: 28

Бренд: TLW Страницы: 2

Бренд: ADJ Страницы: 6

Бренд: BERRIDGE Страницы: 11

Бренд: Helmer Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды