94
Assembling Swivel Gearbox
Assembling Swivel Gearbox
Assembling Swivel Gearbox
Assembling Swivel Gearbox
Assembling Swivel Gearbox
Assembling Swivel Gearbox
Assembling Swivel Gearbox
Assembling Swivel Gearbox
•
Assemble outer ring (7) inside
housing (1), using a pipe and
hammer.
•
Assemble snap ring (4), shim (5)
and inner ring (7) on shaft (18),
using a pipe and hammer.
•
Assemble parallel key (3) on
shaft (18).
•
In order to assemble the gear on
shaft, to heat gear (36) or using
an adequate press.
•
Assemble gear (36), shim (33)
and inner ring (21), using a pipe
and hammer.
•
Assemble the pre-mounted shaft
(18) inside housing (1).
•
Disassemble cover (23), put a
Silicone film in the contact faces
between cover and housing.
•
Assemble cover (23), bolts (22)
and tighten to 5÷6.4 kgm.
•
Put an adhesive tape on splined
shaft (18) in order to prevent any
damage to oil seal lip (19).
•
Assemble oil seal (19) and cap
(8), using pipe and hammer.
•
Assemble shim (20),outer ring
(21) using a pipe and hammer,
inside cover (23).
•
Assemble pre-mounted cover
(23), bolts (22) and tighten
manually.
•
Hit the shaft (18) from both sides,
in order to set the axis.
•
Check the assembled axis
preload, using a torque meter,
the value must be to 0÷3 Kgcm
•
If the value is not correct change
the shim set (20).
Maintenance
Tools
: Allen screw wrench n°8,
comparator, torque meter,
dynamometric wrench, fork wrench
n°5/16”-19.
•
In order to test the right mesh
between the gears, use a color
like Prussian blue on the four
gears teething.
•
Assemble pre-mounted
extension (30), bolts (16b) and
tighten manually.
•
Lock the gear (36) and rotate
manually the shaft (18b) in the
work direction.
•
Verify the right mesh between
gears, (see the technical
specifications on page 15), the
value must be to 0.17÷0.46 mm.
Содержание 4328LT
