113
Assembling Centre Gearbox
Assembling Centre Gearbox
Assembling Centre Gearbox
Assembling Centre Gearbox
Assembling Centre Gearbox
Assembling Centre Gearbox
Assembling Centre Gearbox
Assembling Centre Gearbox
•
Clean all the components from
remaining grease and silicone.
•
Replace any particular damaged.
•
When assembling the taper roller
bearings pay attention to not
make any pressure on the cages
in order to avoid any damage.
•
When assembling oil seals avoid
contact with cutting parts in order
to prevent any damage to the
inner lip.
•
Assemble shim (5), outer ring (6)
inside cover (9), using pipe and
hammer.
•
Assemble shims (3),(2), inner
ring (12), using pipe and hammer
on shaft (8).Assemble blank
washer (14), bolt (10) and tighten
to 5÷6.5 kgm.
•
Assemble gear (4).
•
Assemble shim (11) and inner
ring (6), using pipe and hammer.
Tools
: Pipe, hammer, fork wrench
n°17,dynamometric wrench, torque
meter.
•
Assemble outer rings (12) inside
housing (13) using pipe and
hammer.
•
Assemble the pre-mounted shaft
(8).
•
Assemble pre-mounted cover (9),
bolts (10) and lock manually.
•
Hit the shaft (8) with a plastic
hammer in order to set the axis.
•
Check the assembled axis
preload, using a torque meter,
the value must be to 0÷3 Kgcm
•
If the value is not correct change
the shim set (5). (See figure 2.2.)
•
Unscrew bolts (10) and
disassemble pre-mounted
cover (9).
Maintenance
Содержание 4328LT
