102
Assembling Main Gearbox
LH drawbar
Assembling Main Gearbox
LH drawbar
Assembling Main Gearbox
LH drawbar
Assembling Main Gearbox
LH drawbar
Assembling Main Gearbox
LH drawbar
Assembling Main Gearbox
LH drawbar
Assembling Main Gearbox
LH drawbar
Assembling Main Gearbox
LH drawbar
•
Assemble outer ring (24),(26),
using pipe and hammer.
•
Assemble snap ring (32), gear
(17) on shaft (14), using pipe and
hammer, assemble shim (6),
inner ring (24), using pipe and
hammer.
•
Insert the pre-mounted shaft (14)
inside extension (11).
•
Assemble inner ring (26), shims
(3),(4) and snap ring (31).
•
Hit the shaft (14) from both sides
in order to set the axis.
•
Check the value axis preload
with a torque meter, that must be
to 8÷12 Kgcm.
•
If the value is not correct
disassemble snap ring (31) and
change the shim setting (3) in
order to obtain the right value.
•
Verify the right mesh between
gears (see the technical
specifications on page 13), the
value must to be to 0,22÷0,6 mm.
for gears (17) and 0,12÷0,32
mm. for gears (16),(18). In order
to have the correct backlash,
change the shim setting (5),(6)
figure (2.1), (please be aware
that when you change the shim
setting (5),(6) you will have to
change the opposite shim setting
(9) and please be aware that
when you change the axis shim
setting, you will also have to re-
set the axis preload..
•
Put a color like Prussian blue on
gear's toothing.
•
Put a silicone film between
housing (10) and extension (11)
•
Assemble extension (11), bolts
(29) and tighten to 5÷6,4 Kgm.
•
Lock shafts (15),(16) and rotate
manually in the work direction the
pinion shaft (14)
Tools
: Wrench n°13-19-22,
dynamometric wrench, pipe,
hammer.
•
Put a silicone film between
housing (10) and covers
(12),(13).
•
Assemble cover (12),(13 ), bolts
•
(27),(28) and tighten to 8,5÷10,9
Kgm.
•
Assemble plug (35) and tighten
to 3 Kgm.
Maintenance
Содержание 4328LT
