21
20
HOW TO USE THE CLEANING TOOL
HOW TO CLEAN SILICON PARTS
Clean the rotation wiper under running water.
Thoroughly dry after cleaning. Before assembling the top-set, ensure that the silicon ring is
firmly inserted.
If the silicon ring is not firmly inserted, juice may leak from the bottom of the juicing bowl.
Tip |
Note |
The cleaning tool makes clean-up quick and easy.
Completely dry after cleaning.
Tip |
* The products illustrated in this booklet may vary slightly from the actual product.
Cleaning inside of the bowl
Please unscrew the cover on the bottom and clean inside.
After cleaning, make sure that protrusion part of gear is
placed on the outer part so it fits (connects) with the drum.
Sequence of assembly is in reverse order of disassembly.
Silicon Ring
Remove the silicon ring from
strainer to clean.
After cleaning, push in the silicone
ring.
Juice Cap
Remove from the juice spout
to clean.
After cleaning, attach the juice
cap silicon to the juice spout.
Silicon Brush
Pull out the silicon brushes from
the rotation wiper to clean.
After cleaning, insert into the slot
with the tail pointing down as
shown in the illustration.
EN
EN
After cleaning, remove the strainer from the
cleaning tool. Dry before storing.
4
Under running water, rotate the cleaning tool
and the strainer in opposite directions to clean.
2
Thoroughly rinse the inside and outside of the
strainer under running water.
3
Hold the cleaning tool with one hand and insert
the strainer into the cleaning tool.
1
Note |
Insert the strainer until you hear a click.
