___________________________________________________________________________________________
2
ADVR-2200M
SECTION 1 : SPECIFICATION
Sensing Input (E1, E2, E3) Average Reading
Static Power Dissipation
Voltage
220
600 Vac, 1 phase / 3 phase
Max. 12 watts
DIP switch setting
180
280 Vac @ 220 Vac
Burden in SHUNT & PMG Wiring
330
515 Vac @ 380 / 440 Vac
550 VA @ power input 110 Vac
420
660 Vac @ 480 / 600 Vac
1100 VA @ power input 220 Vac
Frequency
50/60 Hz, DIP switch setting
Quadrature Droop Input (C1, C2)
Power Input (P1, P2)
CT 1A or 5A greater than 5VA (DIP switch setting)
Voltage
60
300 Vac, 1 phase 2 wire
Sensi/- 7% @ PF +/- 0.5 (Droop adjustable)
Frequency
50
500 Hz
Analogue Voltage Input (A1, A2)
Auxiliary Input (P3, P4)
Input resistance greater than 2K ohms
Voltage
40
300 Vac, 1 phase 2 wire
Max. Input +/- 5 Vdc or +10 Vdc
Frequency
40
500 Hz
Sensitivity 1 Vdc for 2.5% Generator Volts (adjustable)
Excitation Output (F+, F-)
Under Frequency Protection (Factory Presets)
110V 1 phase Continuous
63 Vdc
3.5A
50 Hz system presets knee point at 45 Hz
Max. 90 Vdc 7A for 10 secs.
60 Hz system presets knee point at 55 Hz
220V 1 phase Continuous
125 Vdc 3.5A
Max. 180 Vdc 7A for 10 secs.
Over Excitation Protection
220V 3 phase Continuous
150 Vdc 3.5A
Set point 125 Vdc +/- 4 % @ power input 220 Vac
Max. 215 Vdc 7A for 10 secs.
Inverse-time curve. This function can be turned off.
Resistance
≧
18 ohms @ power input 110 Vac
≧
36 ohms @ power input 220 Vac
Voltage Thermal Drift
Max. 100 ohms
Less than 3% at temperature range -40 to +70
˚C
Fuse Spec.
Slow blow 5 x 20 mm S505-5A
Under-Frequency Knee Point Thermal Drift
External Voltage Adjustment (VR1, VR2)
Less than +/- 0.1 Hz at -
40 to +70 ˚C
Max. +/- 5% @ 500 ohms 1 watt potentiometer
Max. +/- 10% @ 1K ohm 1 watt potentiometer
Environment
Operating Temperature
-40 to +60
˚C
Voltage Regulation
Storage Temperature
-40 to +85
˚C
Less than +/- 0.5% ( with 4% engine governing )
Relative Humidity
Max. 95%
Vibration
5.5 Gs @ 60 Hz
Build Up Voltage
5 Vac 25 Hz residual volts at power input terminal
Dimensions
150.0 (L) x 135.0 (W) x 55.5 (H) mm
Soft Start Ramp Time
5.91 (L) x 5.31 (W) x 2.19 (H) inch
4 s/- 10%
Weight
Typical System Response
470 g +/- 2%
Less than 20 milliseconds
1.04 lb +/- 2%
EMI Suppression
Internal electromagnetic interference filtering