Kustom Signals Falcon HR, Руководство оператора

Страница: 85 / 97

SECTION 14 - OPTIONS
14.3
14.1.4 LOW POWER SAVINGS
The Falcon HR defaults to using very low power after 30
seconds in HOLD with no targets locked. The unit will
also turn off after 30 minutes in HOLD and no operator
activity. The power saving operation can be disabled by
adding 8 to the Options total.
14.1.5 FASTEST OPERATION
The Falcon HR offers two modes of fastest operation from
the remote control. The default mode is to push and hold
the FAST switch. Fastest mode is active for as long as the
operator holds down the FAST switch and for 2 seconds
after it is released. The alternate mode is toggle; in this
mode fastest is alternately turned on or off by pressing the
FAST switch. If fastest toggle mode is
desired, add 16 to
the Options total.
NOTE: In handheld operation the fastest option works as
described in Sec. 7.2.3.
14.1.6 INTERFACE OUTPUT PROTOCOL
The Falcon HR defaults to allow the radar unit to interface
with the KSI Eyewitness
®
video or giant display
equipment. Contact Kustom's Customer Service
Department at (800)-835-0156 or (620) 431-2700, before
changing the output protocol option.
14.1.7 SPEED READING UNITS
The Canadian Falcon HR displays the speed readings in
kilometers per hour. It cannot be set to MPH readings. Add
128 to the Options value.