Kustom Signals Falcon HR, Руководство оператора

Страница: 41 / 97

SECTION 7 - OPERATION
7.5
7.1.7 BACKLIGHT
For low light operation, the Falcon HR has a low power
consumption fiber-optic backlight. To turn the backlight
on, press the TEST switch, then while all the LCD
segments are on, press the MODE switch. Repeat to turn
off the backlight.
7.2 OPERATION - HANDHELD
7.2.1 SETUP
1. Attach the corded or battery handle. Turn the unit on.
Place the system in Stationary Mode “ALL” with the
transmitter in HOLD.
2. Set the range and audio levels as needed.
3. Point the Falcon HR at the intended target vehicle, pull
and hold the trigger to take the transmitter out of
HOLD, and complete the tracking history.
4. Complete a tracking history on the target vehicle.
A. Observe the target and surrounding traffic.
B. Estimate the speed of the target vehicle.
C. Listen to the audio pitch and compare the pitch
to the estimate of speed in B.
D. Observe the speed reading shown on the
TARGET window. It should correspond with
B and C above. Continue tracking the target
vehicle as required for proper target
identification.
E. If any of the above elements do not agree, the
reading must be disregarded.