PT5040 Operation Manual Chapter 6 Introduction to [SYSTEM]
the default name-<Unnamed>. Pressing ESC can exit the operation of saving
file. Letters from A to Z, numbers from 0 to 9, and underline, etc. can be
used for a file name.
Enter rules: Pressing a numeric key, the corresponding letters or
characters will be displayed on the screen. If user wants to input a
number, the numeric key should be pressed again. While a letter or
character is needed, then the soft key corresponding to the letter or the
character should be pressed.
Ext. File
Figure 5-3 shows the page of external file.
Figure 5-3 External file
The set parameters can be saved to a U disk (external file) in file format. External file storage
supports three extension names: .STA, .TXT, .CSV. Only .STA file has file load function. Soft
keys in the external file page are as follows:
Sub Dir
Enter the sub-directory. Using the arrow key to choose a file, press Sub Dir
to enter the sub-directory.
Parent Dir
Return to the parent directory.
Create
Create a new folder. Press Create and then input the name of the file folder.
End the creation of new folder by press ENTER. If user presses ENTER
without inputting the folder name, the folder will be named as the default
name-<FOLDERxx> (xx is a number ranging from 01 to 99.). Pressing ESC
5-10
