Küschall Ultra-Light Скачать руководство пользователя

Страница: 11 / 40

KÜSCHALL

ULTRA-LIGHT

Service Manual

BACKREST

Backrest height

The backrest height can be changed by fitting the telescopic tubes
into another position in the backrest tubes. If this setting option is
insufficient, the telescopic tubes can be replaced.

Adjusting the height of standard backrests

Difficulty:

Tool:

3, 4, 6

, 10



Push the backrest cover

upwards and remove the bolt

both sides.



Push the push handles

upwards or downwards until you reach

the required height. Replace the bolt and tighten.

If this setting range is insufficient, use new push handle tubes.

If the backrest height was changed considerably, a new backrest

cover may have to be fitted.

Adjusting the height of Velcro

adjustable backrests

Difficulty:

Tool:

3, 4, 6

, 10



Remove backrest cover and move the Velcro

bands until bolt

is visible.



Remove bolt

and move the push handle tube to the required

height.



Insert bolt

into the appropriate hole and tighten.

If the backrest height is changed considerably, the push handles

must be replaced. An additional Velcro

band may have to be

fitted or one may have to be removed.

Содержание Ultra-Light









































Результаты поиска

Содержание Ultra-Light

Отзывы:

Похожие инструкции для Ultra-Light

Бренды по названию

Популярные бренды

Küschall Ultra-Light, Руководство по обслуживанию

Результаты поиска

Содержание Ultra-Light

Отзывы:

Похожие инструкции для Ultra-Light

Бренды по названию

Популярные бренды