35
KÜSCHALL
ULTRA-LIGHT
© Küschall AG, Switzerland | 2014-07
Service Manual
OPTIONS & ACCESSORIES
OPTIONS & ACCESSORIES
Antitipper
Fitting an antitipper
Difficulty:
Tool:
Ã
5
1
0
Secure adaptation support
with bolt
onto the
adapter plate
.
Height adjustment
Difficulty:
Tool:
Ã
4
8
1
Loosen bolt
and remove the upper end
of the antitipper and
the holder. Remove the sealing cap
(e.g. push it out through
the tube using the screwdriver).
2
Loosen bolt
of the antitipper tube and push sleeve
into the
correct position.
3
Screw bolt
in half way, position spring
in sleeve
and screw
bolt
completely into the tube.
4
Put all the parts of the antitipper back together; in doing so pull
spring
apart, e.g. using a wire hook, and secure it with the top
bolt
.
Set the antitipper parallel to the wheel chair and tighten the bolts.
Function check:
The distance between the antitipper and the ground must be
40 - 60 mm. It must be easy to fold up the antitipper.
Tip the wheelchair backwards using the antitipper until the axle is
perpendicular to the antitipper’s point of contact with the ground. In
this position, the distance between the rear wheel and the ground
must be at least 50 mm.
2
3
1
1
3
4
2
5
2
7
6
1
3
8
5
7
6
x
x 50 mm
à
13
Nm
à
4 Nm
à
7 Nm
