30VT Base Replacement (5/16” Seat Pivot Bolt)
Page
1
of
2
Form-03DOC-003 Rev. 1
Parts Required:
Model 30VT chair with 1/4" seat pivot bolts (Built before 2016-JAN-01) (width specific)
Replacement base for 30VT with 5/16” seat pivot holes (width specific)
Tools Used:
3/16” Allen Key
#2 (Red) Robertson Screwdriver
7/16” Wrench (X2)
1/2” Wrench (X2)
5/16” Drill Bit
Drill
Step
Execution
Figures
1
30VT Base is width specific. See illustration for an example.
Contact your sales representative for configuration verification.
2
Remove original base from chair (keep fasteners for reuse).
3
Remove armrest adjustment set screws and armrests from base.
4
Remove legrest elevation handle from front left side of base.
