1.
Thread the loop
F
through the fixation on the chair
G
and then through BOTH plastic buckles
H
.
4.3 Transit wheels
If your wheelchair is too wide for certain applications, e.g.
trains/aeroplanes, narrow passageways, narrow doors, the
transit wheels can be used.
WARNING!
Risk of severe accidents
– When using transit wheels, the parking brakes
no longer have any effect and you cannot
control your wheelchair via the handrims.
Switching to transit wheels
1.
Lower the transit wheels into the operating position.
To do this, press the pin
A
inwards until you can pull
the tube down.
2.
Press the second pin in.
3.
Pull the tube further downwards until the pin engages
into the slot.
4.
Move the wheelchair to a stable object (door frame,
heavy table), which you can use for support and hold
onto it firmly with one hand.
5.
Tilt the wheelchair until the rear wheel on the opposite
side rises off the floor.
Prior to removing the rear wheels, the distance
between the lowered transit wheels and the floor
should not be more than 2 cm.
1659285-A
25
