Küschall Compact FF Скачать руководство пользователя страница 54

Страница: 54 / 60

Küschall® Compact

10.2 Identifying and repairing Faults

Fault

Possible Cause

Action

The wheelchair does not
travel in a straight line

Incorrect tyre pressure on one rear wheel

Correct tyre pressure, →

11.2 Tyres, page 57

One or more spokes broken

Replace faulty spoke(s), → qualified technician

Spokes tightened unevenly

Tighten loose spokes, → qualified technician

Castor supporter is not aligned correctly

Correct position and alignment of the castor
supporter, → qualified technician

Castor bearings are dirty or damaged

Clean or replace the bearings, → qualified
technician

Rear wheels are off track

Change track, → qualified technician

Castors not adjusted to same height

Position the castors such that they touch the floor
at the same time, → qualified technician

The wheelchair tips
backwards too easily

Rear wheels are mounted too far forwards

Mount the rear wheels further back, → qualified
technician

Back angle too large

Reduce the backrest angle, → qualified technician

Seat angle too large

Mount the adapter plate lower on the side profile,
→ qualified technician

Select a smaller castor fork, → qualified technician

Removable axles dirty

Clean removable axles

Removable axles cannot be
inserted correctly

Removable axles misaligned

Adjust removable axles, → qualified technician

1659285-A

Содержание Compact FF





























































Результаты поиска

Содержание Compact FF

Отзывы:

Küschall Compact FF, Руководство пользователя, Страница: 54 / 60

Результаты поиска

Содержание Compact FF

Отзывы: