Kusam-meco M3500A, Руководство по эксплуатации, Страница: 64 / 158

64
How to set up RTD
You can set up the RTD configuration either through the front panel
operation or through the remote interface operation.
Front Panel Operation
If you are using RTD, press CONFIG and then TEMP. Use
◁
and
▷
to
locate SENSOR submenu. Press ENTER to go to the submenu. Use
◁
and
▷
to locate your sensor type Press ENTER to select your desired
sensor type.
Choosing
USER takes you to a menu where you can specify factors used
in the calculation equation to obtain the temperature. Use
◁
and
▷
to
move through the digits and
△
and
▽
to change the numbers to a
desired value. Press ENTER to set the value.
Choosing
SPRTD takes you to a menu where you can specify the seven
coefficients that are used to determine the temperature. Use
◁
and
▷
to move through the digits and
△
and
▽
to change the numbers to a
desired value. Press ENTER to set the value.
Remote Interface Operation
Use the following commands to set up the RTD configuration.
SENSe:TEMPerature:RTD:TYPE{PT100|D100|F100|PT385|PT3916|USER|SPRTD|NTCT}
SENSe:UNIT {Cel|Far|K}
SENSe:UNIT?
SENSe:TEMPerature:RTD:RZERo {<
value >|MINimum|MAXimum}
SENSe:TEMPerature:RTD:ALPHa {< value >|MINimum|MAXimum}
SENSe:TEMPerature:RTD:BETA {< value >|MINimum|MAXimum}
SENSe:TEMPerature:RTD:DELTa {< value >|MINimum|MAXimum}
SENSe:TEMPerature:SPRTD:RZERo {< value >|MINimum|MAXimum}
SENSe:TEMPerature:SPRTD:A4 {< value >|MINimum|MAXimum}
SENSe:TEMPerature:SPRTD:B4 {< value >|MINimum|MAXimum}
SENSe:TEMPerature:SPRTD:AX {< value >|MINimum|MAXimum}
SENSe:TEMPerature:SPRTD:BX {< value >|MINimum|MAXimum}
SENSe:TEMPerature:SPRTD:CX {< value >|MINimum|MAXimum}
SENSe:TEMPerature:SPRTD:DX {< value >|MINimum|MAXimum}