manualshive.com logo in svg

Kurzweil K2600 Series, Руководство по обслуживанию

Поделиться
Скачать
Kurzweil K2600 Series Скачать руководство пользователя страница 70

4-20

K2600/K2600X Disassembly/Assembly

Bottom Enclosure

Note:

  If you are servicing a K2600, one 

fl

at 

fl

ex cable attaches to the Mod Wheel 

Assembly, location J403. If you are servicing a K2600X, two 

fl

at 

fl

ex cables attach to the 

Mod Wheel Assembly, locations J403 and J404.

3. Disconnect the shielded wire cable from J302 on the Slider Board. This cable connects to 

the small button board on the Mod Wheel Assembly and is soldered into the board at that 
location.

4. From the Mod Wheel Assembly, disconnect the two shielded wire cables from locations 

J401 and J406. Both of these cables connect to the Keyboard Scanner Board.

Note:

  At this point the Mod Wheel Assembly can be moved for access to its components. 

If you are replacing the Mod Wheel Assembly, continue with Step 5.

5. The shielded cable that connects the small button board on the Mod Wheel Assembly to 

location J302 on the Slider Board is soldered directly to the small button board. This cable 
and other cables are bundled together in two places with tie wraps. Cut the tie wraps to 
free the small button board cable, and remove the Mod Wheel Assembly.

Replacing the Mod Wheel Assembly

1. Hold the Mod Wheel Assembly in position over the bottom enclosure.

2. Connect the 

fl

at 

fl

ex cable(s).

Note:

  If you are servicing a K2600, connect the 

fl

at 

fl

ex cable to location J403 on the Mod 

Wheel Assembly. If you are servicing a K2600X, connect the two 

fl

at 

fl

ex cables to 

locations J403 and J404 on the Mod Wheel Assembly.

3. Connect the shielded wire cable to J302 on the Slider Board.

4. Connect the two shielded wire cables to locations J401 and J406 on the Mod Wheel 

Assembly.

5. Reapply the nylon reinforced tape to the 

fl

at 

fl

ex cable(s).

6. Lower the Mod Wheel Assembly into position.

7. If you are installing a replacement Mod Wheel Assembly, be sure to install the two tie 

wraps to bundle the cables.

8. Slide the left side of the unit forward so that you can install the four screws and washers 

to secure the Mod Wheel Assembly to the bottom enclosure.

Содержание K2600 Series













































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды