manualshive.com logo in svg

Kurzweil K2600 Series, Руководство по обслуживанию

Поделиться
Скачать
Kurzweil K2600 Series Скачать руководство пользователя страница 63

K2600/K2600X Disassembly/Assembly

Top Enclosure

4-13

Removing the Control Panel Board

1. Follow the procedures on page 4-11 to remove the LCD and Backlight Boards. If the unit 

you are servicing has a Sampling Board, follow the procedure on page 4-9 to remove it.

2. The Control Panel-to-Keyboard Scanner Board 

fl

at ribbon cable is soldered into the 

Control Panel Board. Remove the cable locking clip and disconnect the 

fl

at ribbon cable 

from the Keyboard Scanner Board, location J705.

3. The enclosure support wall secures the front edge of the Control Panel Board to the top 

enclosure. Remove the enclosure support wall screws, and set the wall aside.

Note:

  If you are servicing a K2600, there are seven screws securing the enclosure support 

wall. If you are servicing a K2600X, there are eight screws.

4. Once the enclosure support wall is removed, you will notice that the Control Panel Board 

also has adhesive-backed black felt that secures the front edge of the board to the top 
enclosure. Peel back the black felt to release the front edge of the board.

Figure 4-7

Control Panel Board

5. Remove the seven screws that secure the rear panel edge of the Control Panel Board to the 

top enclosure.

6. Slightly lift the Control Panel Board up horizontally just enough to insure that the 

spinknob and switch caps clear the openings provided for them.

7. Lift the right side of the board up vertically to gain access to the 

fl

at ribbon cable that 

connects the Control Panel Board to the Slider Board.

8. This cable is soldered into the Control Panel Board. Disconnect the cable from the Slider 

Board, location J303.

9. Remove the Control Panel Board.

Replacing the Control Panel Board

1. Position the Control Panel Board over the top enclosure and lower the left side of the 

board so that you can connect the 

fl

at ribbon cable to the Slider Board.

2. Once this cable is connected, lay the Control Panel Board 

fl

at, then raise the top enclosure 

up slightly to verify that the spinknob and switch caps are correctly positioned through 
the openings provided for them in the top enclosure.

3. Install the seven screws that secure the Control Panel Board to the top enclosure.

4. Reapply the adhesive-backed black felt on the front edge of the board.

LCD Board

Ribbon cable to
Slider Board

Ribbon cable to
Scanner Board

Black felt

Содержание K2600 Series













































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды