Kurzweil K2600 Series Скачать руководство пользователя страница 40

Страница: 40 / 172

3-10

K2600R Disassembly/Assembly

Opening the K2600R

Replacing the Transformer

1. Position the transformer over the mounting holes provided for it on the bottom enclosure.

2. Install the four screws and split washers that secure the transformer to the bottom

enclosure.

3. Connect the stranded wire cable that connects the Backlight Board to the Power Supply

Board at location J104.

4. Connect the two stranded wire cables that connect the transformer to the Power Supply

Board at locations J102 and J101.

5. Connect the stranded wire cable that connects the transformer to the AC Entry Module.

Removing the Backlight Board

The Backlight Board is mounted on the front panel mounting bracket and is secured with four
screws.

1. Disconnect the stranded wire cable that connects the Backlight Board to the Power Supply

Board.

2. Disconnect the stranded wire cable that connects the Backlight Board to the LCD Board.

3. Remove the four screws that secure the board to the front panel mounting bracket. These

screws also secure the cover plate over the board. Be aware that once the screws are
removed, the cover plate is no longer attached to the board.

Note:

Access to the lower right screw (as viewed standing at the rear panel) is limited due

to its close proximity to the transformer. Be sure to use an appropriate style screwdriver to
avoid damaging the transformer.

4. Remove the Backlight Board.

Replacing the Backlight Board

1. Position the Backlight Board over the mounting standoffs on the front panel mounting

bracket. Be sure that the cover plate is correctly positioned over the board.

2. Install the four screws that secure the board to the front panel mounting bracket. Use an

appropriate style screwdriver to avoid damaging the transformer.

3. Connect the stranded wire cable from the LCD Board to its location on the Backlight

Board.

4. Connect the stranded wire cable from the Power Supply Board to its location on the

Backlight Board.

Содержание K2600 Series













































































































































































Результаты поиска

Содержание K2600 Series

Отзывы:

Похожие инструкции для K2600 Series

Бренды по названию

Популярные бренды

Kurzweil K2600 Series, Руководство по обслуживанию

Результаты поиска

Содержание K2600 Series

Отзывы:

Похожие инструкции для K2600 Series

Бренды по названию

Популярные бренды