manualshive.com logo in svg

Kurzweil K2600 Series, Руководство по обслуживанию

Поделиться
Скачать
Kurzweil K2600 Series Скачать руководство пользователя страница 43

K2600R Disassembly/Assembly

Front Panel Assembly

3-13

Figure 3-4

Front Panel Assembly, exploded view

3. Tilt the front of the K2600R up and remove the three screws along the bottom edge of the 

front panel mounting bracket.

Caution:

  If the unit you are servicing has a Sampling Board installed, the hardware that 

secured it was removed during the removal of the front panel cover. At this point, the 
Sampling Board is held in place only by the cables connected to it. When you tilt the 
K2600R up to remove the screws located on the bottom edge, be careful to not allow the 
board to move freely and cause damage to it or other components.

4. Place the K2600R 

fl

at in its normal position.

5. Remove the two screws from the top of the front panel mounting bracket. The screws are 

at the corners of the bracket.

6. The Headphone/Volume Board is attached to the front panel mounting bracket. It is 

secured to the front panel mounting bracket with the volume potentiometer mounting 
hardware.

7. Unless the service you are providing requires that you have access to the components on 

the Headphone/Volume Board, it is not necessary to remove the board when removing 
the front panel mounting bracket. However, two shielded wire cables are connected to the 
Headphone/Volume Board. These cables are soldered into the board and are routed to the 
Audio Board. Disconnect the two shielded wire cables from the Headphone/Volume 
Board at locations J612 and J615 on the Audio Board.

8. Remove the locking cable clip and disconnect the 

fl

at ribbon cable connecting the CPU 

Board to the LCD Board.

9. Two Front Panel/Scanner Board cables are routed over the disk drive mounting bracket 

and are secured to it with tape. Peel back the tape from one side.

10. Remove the locking cable clip and disconnect the 

fl

at ribbon cable from the Front 

Panel/Scanner Board.

11. Disconnect the shielded wire cable from the Front Panel/Scanner Board.

12. Remove the front panel mounting bracket. To clear the top cover mounting holes located 

on the left side of the bottom enclosure, 

s

lide the mounting bracket out from the right side 

of the K2600R.

Содержание K2600 Series













































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды