For your safety
WARNING
Fire hazard due to hot soldering tool!
a) Before switching on the soldering station, all easily combustible objects, li-
quids and gases must be removed from the working area!
b) Always place the soldering tool in the supporting stand when not in use!
c) Disconnect the soldering station from the mains after use!
CAUTION
Risk of burns! The soldering iron gets hot immediately after it is switched on!
Never touch the hot soldering tip or the hot heating element directly!
WARNING
Danger of electric shock when soldering!
a) Carry out soldering work only on de-energised parts!
b) Do not expose the soldering station and soldering iron to large mechanical
loads!
c) Do not immerse the soldering tool in liquids to cool it off!
WARNING
Possible danger of fire or property damage!
Danger of heat accumulation if ventilation slots are covered!
a) Never cover the ventilation slots of the soldering station!
CAUTION
Wear protective equipment!
During soldering, hot solder or corrosive flux material can splatter from the solder
joint. Avoid getting solder or flux material in the eyes or on the skin by wearing
protective equipment!
a) Adhere to the company’s internal regulations for protective clothing!
b)Adhere to the safety data sheets for the solder and flux material used!
Ersa GmbH
3BA00252-01 | Rev. 1
6
