Function description
6.2
Changing soldering tips
The new 142 soldering tip series was developed for the soldering station i-CON
TRACE
®
. The “Ersa TRACE Cockpit” web app can use the QR code on each soldering
tip to recognise the soldering tip and manage the work carried out with it.
6.2.1
Changing a soldering tip in the supporting stand
Info: Place the soldering iron only with the soldering tip mounted and only in the
central soldering iron stand, not in the four changeable funnels on the side of the
supporting stand! The changeable funnels may only be used for storing the solder-
ing tips.
To change the soldering tip, the supporting stand can be used as described below.
CAUTION
Attention Risk of burns!
After switching off, the soldering tip remains hot for a long time!
CAUTION
Risk of burns! The soldering iron gets hot immediately after it is switched on!
Never touch the hot soldering tip or the hot heating element directly!
To prevent any material damage due to overheating, switch off the heating ele-
ment or the soldering station before each soldering tip replacement! Never oper-
ate the soldering iron without the soldering tip!
Heating element immediate switch-off
a) Double tap the soldering iron to turn off the heating element. While tapping,
tilt the soldering iron slightly upwards (see Fig. 14).
Fig. 14: Double tap the soldering iron
Ersa GmbH
3BA00252-01 | Rev. 1
31
