18
GB
REMOTE CONTROL (OPTIONAL)
The appliance can be controlled using a remote control
powered by a 1.5 V carbon-zinc alkaline batteries of
the standard LR03-AAA type.
• Do not place the remote control near to heat sources.
• Used batteries must be disposed of in the proper
manner.
MAINTENANCE
Grease filters
CLEANING METAL SELF- SUPPORTING GREASE FILTERS
Alarm signal reset
• Switch off the lights and extractor motor.
• Press button
T3
for at least 3 seconds, until the leds start to flash.
Cleaning the filters
• The filters are washable and must be cleaned when
led S1 flashes or at least every 2 months of opera-
tion, or more frequently for particularly heavy us-
age.
• Remove the filters one at a time by pushing them
towards the back of the group and pulling down at
the same time.
• Wash the filters, taking care not to bend them.
Allow them to dry before refitting.
• When refitting the filters, make sure that the handle
is visible on the outside.
Ducting panels
• Open the ducting panels.
• Disconnect the panel from the hood canopy by
sliding the fixing pin lever.
• Clean the outside using a damp cloth and neutral
liquid detergent.
• Clean the inside using a damp cloth and neutral
detergent; do not use wet cloths or sponges, or
jets of water; do not use abrasive substances.
