17
GB
L
S1
T1
T2
T3
T4
USE
Control Panel
The hood can be switched on pushing directly onto the requested speed without
firstly having to select 0/1 button.
KEY
LED
FUNCTIONS
L
0/1 Light
Turns lighting on and off.
T1
0/1 Motor
on
First speed.
When pressed for about 1 seconds the motor is
switched off.
Flashing
24h Changeover
This is enabled by pressing and holding the
button for approximately 5". It allows a
suction level of 100 m3/h with a noise level
of just 28dB(A). Can be enabled at any
speed, even with the hood turned off. To
disable, press and hold the button for
approximately 5".
T2
Speed
on
Second speed.
Flashing
Delay (30')
Press the button for approximately 2" to enable automatic
shutdown with a 30' delay. Suitable to complete elimination
of any residual smells. Can be enabled at any speed and is
disabled by pressing the button briefly.
T3
Speed
on
Third speed.
T4
Speed
Fixed
Max. speed
Flashing
Intensive speed.
Suitable for the strongest cooking vapours and odours. The
function becomes active when the button is pushed for about
2 seconds. After 10 minutes of functioning it turns off
automatically. This function can be interrupted by means of
pressing any of the buttons.
S1
Led
Fixed
Indicates that the Metal grease filters saturation alarm has
been triggered, and the filters need to be washed. The alarm
is triggered after 100 working hours.
(Reset; check the
Maintenance-paragraph)
Flashing
indicates that the activated charcoal odour filter saturation
alarm has been triggered, and the filter has to be replaced;
the metal grease filters must also be washed. The activated
charcoal odour filter is triggered after 200 working hours.
(Activation and Reset; check the Maintenance-paragraph)
