14
223279
1. Operations
1.1 Your new hob with Touch-Control operation
This manual covers the models: FGKST 58.., FGKST 75.., .GKST 58.. and .GKST 75...
1.2 Touch-Control operating panel
After the supply voltage has been connected (mains connection), a self-test is carried out which is concluded
when a short acoustic signal is to be heard.
햲
Cooking level display
햳
Readiness point for cooking zone
(lit: cooking zone can be used)
햴
Multi-circuit control lamp
햵
Multi-circuit key
햶
Plus key
햷
Time display
햸
Timer control lamp
햹
Locking key
햺
Control lamp lock (control)
햻
Cooking zone key
햽
Minus key
햾
Timer key
햿
On/Off switch (control)
1.3 Touch-Control operations
Each key operation is always confirmed by an acoustic signal.
Pressing the On/Off switch key
햿
switches on the control system: Put your finger on the button until a “0” lights
up at all of the cooking level displays and the cooking zone standby dot
햳
flashes. The next action must be
carried out within ten seconds, otherwise the control system will automatically switch off again.
To switch on a cooking zone, press the corresponding cooking zone key
햻
of the required cooking zone. The
appropriate stand-by dot cooking zone
햳
of the activated cooking zone lights up.
Select a cooking level from 1 to 9 by means of the Minus or Plus keys
햽
/
햶
. When switched on, each cooking
zone can be switched off again at any time. To do this, the required cooking zone must be activated, the stand-by
dot
햳
lights up.
The Minus key
햽
can be used to turn the cooling level down to “0”; if the Minus and Plus keys
햽
+
햶
are pressed
at the same time, the cooling level can be switched off directly.
In all cases the complete control system can be switched off at any time by pressing the on/off key
햿
: To switch
off the entire cooking range place your finger briefly on the On/Off switch
햿
until the control lights go out.
Pressing locking key
햹
prevents all the keys - with the exception of the On/Off key
햿
from being operated by
mistake. Successful locking is indicated by the control lamp
햺
. Pressing the locking key
햹
cancels this
command again.
Residual heat display
The residual heat display is by means of an illuminated “H” on the appropriate cooking level display
햲
.
