16
223279
When can Pot Recognition be switched off?
1. When using non-metallic pots.
2. For pots which, because of their size or material, switch on the outer element in the case of multiple
circuit cooking zones without sufficiently covering them.
For safety reasons, turn off the cooking zone after use by means of the Touch-Control, so that the
shifting of pots or setting down of metal objects does not accidentally activate a cooking zone while PR
is still turned on.
Timer
The timer can be used to automatically switch off a cooking zone after a pre-set time of between 1 and
99 minutes. The required cooking zone must be activated, stand-by dot
햳
lights up. Select a cooking level from
1 to 9 by means of the minus or plus keys
햽
/
햶
. Then press timer key
햾
. The timer display
햷
shows “00”. Select
the required cooking time between 1 and 99 minutes by means of the Minus or Plus keys
햽
/
햶
. The control lamp
햸
of the selected cooking zone lights up.
The selected cooking time can be altered at any time. Activate the relevant cooking zone, press timer key
햾
and
change the cooking time by means of the Minus or Plus keys
햽
/
햶
.
When the pre-set cooking time has finished, the cooking zone switches off automatically and an acoustic signal
sounds for two minutes. This can be switched off by pressing any key.
If you want to switch the timer off beforehand, press cooking zone key
햻
and timer key
햾
. The Minus key
햽
can
now be used to set the timer to ”00”, or alternatively this can be done by the simultaneous pressing of the Minus
and the Plus keys
햽
+
햶
.
The timer can also be used as an egg timer when none of the cooking zones are activated. In this case, no
cooking zone should be activated when the timer
햾
is being set (the cooking zone stand-by dot
햳
does not light
up).
Safety switch-off
Continuous operation of each individual cooking zone is
temporally limited by a safety shut-off which switches off the
cooking zone in accordance with the selected cooking level
after a specified time interval. The intervention times of this
safety device are included in the attached time table. When the
safety switch-off has switched off the touch control system, a
”0” is shown in the cooking level display
햲
, or an ”H” if there is
still any residual heat left. Pressing the On/Off key
햿
makes
the control system ready for operation again.
If more than one key is pressed simultaneously - with the
exception of the Minus and Plus keys - the control system will
not accept this as a valid command. If one or more keys are
activated for longer than 30 seconds, for example by boiling
over or the weight for a pan, the control system assumes that
there is an error and switches off automatically. If key operation
continues, a constant acoustic signal sounds.
Table of times
MOT =
maximum operating time,
in hours
Cooking level
MOT (h)
1
6
2
6
3
5
4
5
5
4
6
1.5
7
1.5
8
1.5
9
1.5