background image

Safety instructions

GB

19

Safety instructions

Connection and operation

• The appliances are constructed in accordance with the

relevant safety regulations.

• Connecting the appliance to the mains and repairing and

servicing the appliance may only be carried out by a qualified
electrician according to currently-valid safety regulations. For
your own safety, do not allow anyone other than a qualified
service technician to install, service or repair this appliance.

Concerning the hob

• Never allow the induction hob to operate unattended, as

the high power setting (power max.) results in extremely
fast reactions.

• When cooking, pay attention to the heat-up speed of the

cooking zones. Avoiding boiling the pots dry as there is a risk
of the pots overheating!

• Do not place empty pots and pans on cooking zones which

have been switched on.

• Take care when using simmering pans as simmering water

may dry up unnoticed, resulting in damage to the pot and to
the hob for which no liability will be assumed.

• It is essential that after using a cooking zone you switch it off

with the respective minus button and not just with the pan
recognition device.

• Overheated fats and oils may spontaneously ignite. Always

supervise the preparation of food with fats and oils. Never
extinguish ignited fats and oils with water! Put the lid on the
pan and switch off the cooking zone.

• The glass ceramic surface of the hob is extremely robust. You

should, however, avoid dropping hard objects onto the glass
ceramic hob. Sharp objects which fall onto your hob might
break it.

• If cracks, fractures or any other defects appear in your glass

ceramic hob, immediately switch off the appliance. Disconnect
fuse immediately and call Customer Service.

• If the hob cannot be switched off due to a defect in the sensor

control immediately disconnect your appliance and call
Customer service.

• Take care when working with home appliances! Connecting

cables must not come into contact with hot cooking zones.

• The glass ceramic hob should not be used as a storage area.

• Do not put aluminium foil or plastic onto the cooking zones.

Keep everything which could melt, such as plastics, foil and in
particular sugar and sugary foods away from hot cooking
zones. Use a special glass scraper to immediately remove any
sugar from the ceramic hob (when it is still hot) in order to
avoid damaging the hob.

• Metal items (pots and pans, cutlery, etc.) must never be put

down on the induction hob since they may become hot. Risk of
burning!

• Do not place combustible, inflammable or heat deformable

objects directly underneath the hob.

• Metal items worn on your body may become hot in the

immediate vicinity of the induction hob. Caution! Risk of burns! 
Non-magnetisable objects (e.g. gold or silver rings) will not be
affected.

• Never use the cooking zones to heat up unopened tins of food

or packaging made of material compounds. The power supply
may cause them to burst!

• Keep the sensor buttons clean since the appliance may

consider dirt to be finger contact. Never put anything (pans,
tea towels etc.) onto the sensor buttons!
If food boils over onto the sensor buttons, we advise you to
activate the OFF button.

• Hot pans should not cover the sensor buttons, since this will

cause the appliance to switch off automatically.

• Activate the childproof lock if there are any pets in the home

which could make contact with the hob.

• The induction hob may not be used when pyrolysis operation

is taking place in a built-in oven.

Concerning persons

• Caution!

People who are not familiar with the built-in hob must only be
allowed to operate it under supervision. Small children must
always be kept away from the hob. Never allow them to play
with the appliance.

• Attention:

The surfaces of the heating and cooking zones become hot
during use. Keep small children away at all times.

• Persons with cardiac pacemakers or implanted insulin pumps

must make sure that their implants are not affected by the
induction hob (the frequency range of the induction hob is 20-
50 kHz).

Содержание EKI 307.1
















Отзывы: