Operation
GB
23
Operating the buttons
The controls described here expect the pressing of a (selection) button
to be
followed
by the pressing of a subsequent button.
The next button will need to be pressed
within 10 seconds
, otherwise the
selection will be deleted.
The plus/minus buttons can be touched individually or be permanently
pressed.
Switching on the hob and cooking zones
1. Press the
on/off button
until the power setting displays indicate 0. A
short signal will sound. The controls are ready for operation.
2. Immediately use the
plus button
or the
minus button
to select a
cooking level. The plus button will activate power setting 1 and the minus
button power setting 12.
3. Place a
metal cooking pot
onto the cooking zone. The pan recognition
device will activate the induction coil.
As long as no metal cooking pot is placed onto the cooking zone, the
display will alternate between the power level set and the symbol . If
no pot is placed on the cooking zone it will switch off after 10 minutes for
reasons of safety. Please refer to the Section on “pan recognition”.
Switching off a cooking zone
4. a) Press the
minus button
several times until the power setting
display shows 0, or
b) Press the
minus button
and the
plus button
once at the same
time. The cooking zone is switched off direct irrespective of the power
setting or
c) Press the
on/off button
. The entire hob will be switched off (all of
the cooking zones are switched off).
Switching off the hob
5. Press the
on/off button
. The hob will be completely switched off,
irrespective of any settings.
STOP function
The cooking process can be briefly interrupted with the STOP function, e.g. if
the doorbell rings. The STOP function must be released in order to continue
cooking at the same power level. If a timer has been set it will pause and will
then continue.
This function is only available for 10 minutes for reasons of safety. The hob
will then be switched off.
1. Pots and pans are on the cooking zones and the required power levels
have been set.
2. Press the
STOP button
. The letters S-T-O-P will be shown one after
another instead of the cooking levels previously selected.
3. The interruption is ended by firstly pressing the
STOP button
and
then pressing any
other button
(except the on/off button).
The second button must be pressed within 10 seconds as the hob will
otherwise be switched off.
Suitable for induction cooking
