Installation instructions for fitter
Küppersbusch built-in ovens should only be connected to the correspon-
ding Küppersbusch built-in hobs by a qualified and authorised electrician.
The statutory regulations and the connection specifications issued by the
local power company must be observed to the letter.
Safeguard the cooker by means of line-protecting switches, fuses or con-
tactors with a contact opening of at least 3 mm.
Switch off the cooker by means of these safety devices before con-
necting up the oven, carrying out repair work or replacing the light bulb.
It must not be possible to touch energised components.
The earth wire must be so long that when the mains lead cleat fails, the
live wires of the connecting cable are subjected to tension before the
earth wire.
Electrics
WARNING!
This appliance must be earthed!
Built-in oven
Permanent connection by means of an oven
socket.
Hob
Connected via the oven connection strip.
Circuit diagram
for the various mains ratings, is illustrated
on the back wall of the cooker.
Total power
at 230 V
: max. 9.8 kW, of which
oven: 2.5 kW and
hob: max. 7.3 kW (depending on model)
at 235 V:
max. 10.2 kW, of which
oven: 2.6 kW and
hob: max. 7.6 kW (depending on model)
Connection values
Permanent connection 400 V 3 N
∼
50 Hz
Connection 3 N
∼
Fuse current 20 A
Connection 2 N
∼
Fuse current 30 A
Connection 1 N
∼
Fuse current 35 A
Connection 3 x 230 V Fuse current 25 A
Connection cable
Use H 05 RR-F or H 07 RN-F.
Cable length at least 2 m
Installation dimensions
Installation in a fitted kitchen
The cooker has a Y-type design and protects the surrounding surfaces (fit-
ted cupboard components) from overheating. The plastic coating or veneer
must be applied with a heat-resistant adhesive (100 °C). This adhesive pre-
vents the surfaces from warping or working loose.
This cooker can be placed with its back wall and one side wall next to cup-
board or room walls of any height. The other side wall may only be placed
next to a fitted cupboard of the same height at the most. The cooker must
be installed so that it is absolutely level.
Installing the oven
Insert the oven a short way into a cup-
board alcove.
Press the correctly positioned electrical
hob connection into the oven connector
strip as far as it will go.
Push the oven right into the cupboard
alcove. Do not jam the cooker connection!
Securing the oven
Open the oven door.
Using the screws which are provided
with the appliance, screw the cooker to
the fitted cupboard element from the in-
side outwards, starting at a slant.
20
EEH 610.0
