Kuppersbusch GKS 324.0-54, Руководство пользователя

Страница: 8 / 25

8 H2-120-01-01
For internal use only
2.2 Assembly
KÜPPERSBUSCH built-in hobs can and may be exclusivley combined with KÜPPERSBUSCH built-in
ovens with appliance ventilation. The use of other brands excludes any liability by KÜPPERSBUSCH.
The granted test marks and approvals become void in the case of disregarding of this instruction!
2.3 Installation Dimensions
GKS 324.0-54 GKS 644.0-54
2.4 Installation
Using clips makes it easier and quicker for you to install these units. You can carry out the complete
installation work from above.
♦
First of all make a clean cut into the worktop observing the indicated dimensions (see “Installation
Dimensions”).
♦
Make sure that the gasket of the hob is properly seated. If the worktops are uneven (tiles etc.), you
must also apply a temperature-resistant sealing mass around the edge of the hob.
♦
Do not apply the sealing mass underneath the hob onto the worktop as the work surface will be
damaged when the hob is removed.
♦
Now convert the hob - if necessary - to a different type of gas.
♦
Then insert the clips on the cooking area worktop cut-out as shown in the figures on the previous
page, observing the clearances indicated.
The clips are screwed in different heigth to the hob, according to the thickness of the worktop (30 or 40 mm).
*Appliance height