Kuppersbusch GKS 324.0-54, Руководство пользователя

Страница: 10 / 25

10 H2-120-01-01
For internal use only
Insert the rear edge of the hob and carefully lower it. At the same time press in the clips with both hands.
Press hob downwards until it rests completely on the worktop.
If the worktop cut-out should be a little too large, it is possible to increase the preliminary spring tension
of the clips by screwing them down.
In case several hobs are installed next to each other the minimum distances indicated in the following
drawing have to be observed.
Top view
Detail
Hob
Worktop