22
To prevent the appliance from heating up, ensure that an adequate ventilation gap is retained and install a
suitable thermal insulation panel. An adequate flow of air to and from the cooling system must be ensured.
The appliance must be installed to all electrical, plumbing, water and drain connections in accordance with
state and local codes.
NOTE: Make sure that the socket and ON/OFF switch are easily accessible after the appliance
has been installed.
BUILT-IN CABINET INSTRUCTIONS
The wine cooler door seals the installed unit almost completely, so an air vent must provided in the base of the housing.
Warmed air must be conducted via the ventilation shaft to the rear wall of the housing and then expelled upwards. The
ventilation channels should measure at least 200 square centimeters in cross-section.
WARNING:
To ensure the proper functioning of the appliance, air vents should never be blocked or covered.
