26
SETTING THE TEMPERATURE CONTROL
The wine cooler has two temperature zones. The temperature settings of LOWER ZONE and UPPER ZONE are
adjustable with the range 5º-22ºC/40º-72ºF. It is recommended to set the LOWER ZONE to 13-22ºC / 55-72ºF
which is ideal for storing white and red wines and the UPPER ZONE to 5-13ºC / 40-55ºF which is ideal for storing
sparkling and white wines.
NOTE:
The temperature set for the LOWER ZONE must always be the same or higher than that
in the UPPER ZONE. For optimal performance, the set temperature of the two zones should
differ by at least 4°C.
You can touch
mark to set the internal temperature for each zone. The degrees indicators will appear in
the display window marked for UPPER ZONE and for LOWER ZONE.
When you touch the
mark for the
first time, the LED readouts will show the original temperature sets
previously (the preset temperature at the factory for UPPER ZONE is 10ºC / 50ºF and for LOWER ZONE is 16ºC /
60ºF).
Touch the
mark once. The left LED indicator for UPPER ZONE will flash. Then touch the
or
marks to set the desired temperature.
When you touch the
mark again, the right LED indicator for LOWER ZONE will flash. Then proceed to
touch the
or
marks to set the desired temperature for the LOWER ZONE.
The temperature will increase 1°C or 1ºF if you touch the
mark once, or the temperature will decrease
1°C or 1ºF if you touch the
mark once.
To view the “set” temperature in either zone at any time, touch the
or
mark, the “set” temperature
will temporarily “flash” in the LED display for 5 seconds. You can touch the
mark to view the temperature
setting from one zone to the second zone.
