background image

Operation

GB

27

STOP function 

 

The cooking process can be briefly interrupted with the STOP function, e.g. if
the doorbell rings. The STOP function must be released in order to continue
cooking at the same power level. If a timer has been set it will pause and will
then continue.
This function is only available for 10 minutes for reasons of safety. The hob
will then be switched off.

1. Pots and pans are on the cooking zones and the required power levels

have been set. The symbol 

 will light up.

2. Press the 

STOP key

 

. The letters S-T-O-P will be shown one after

another instead of the cooking levels previously selected. 
The symbol 

 will blink because the function has been activated.

3. The interruption is ended by firstly pressing the 

STOP key

 

 and then

pressing 

any other key

 (except the ON/OFF key).

The second key must be pressed within 10 seconds, otherwise the hob
will switch off.

Child safety device / lock 

The child safety device/ lock can be used to lock key operation and cooking
level settings. Only the ON/OFF key can be used to switch the hob off.

Activating the child safety device/ lock

1. Switch on the hob. The symbol 

 will light up.

2. Press 

the lock key

 

 to activate the child safety device.

The symbol 

 will blink because the function has been activated.

Switching off the child safety device/ lock

3. Press the 

lock key

 

.

The symbol 

 will light up.

Notes

• An activated lock will remain activated even if the hob is switched off. It

must therefore be de-activated when cooking is re-commenced.

• In the event of a power cut the lock will be cancelled, i.e. deactivated.

blinking

lit

Содержание EKI 6741


















Отзывы: