30
Operation
GB
Keep-warm function
With the keep-warm function you can use one of the cooking zones to
keep food warm. The respective cooking zone is operated at a low power
level.
1. Cookware is placed on a cooking zone and a power level (e.g. 3) is
selected.
2. Pressing the
sensor field
or moving your finger over it will
reduce the power level. Stop at ; the keep-warm function has been
activated.
3. Press the
sensor field
on the left to switch it off.
The keep-warm function is available for 120 minutes, after which the cooking
zone will be switched off.
Power boost setting
(cooking zones marked with a P)
The power boost setting makes additional power available for induction cook-
ing zones. A large quantity of water can be brought to the boil very quickly.
1. Switch on the hob.
2. Press the
power key
once. The symbol
will blink for approx.
5 seconds.
3. Then press the respective
sensor field
to allocate it to a spe-
cific cooking zone.
The symbol
is shown and the power boost setting has been switched
on.
4. After 10 minutes the power boost setting will switch off automatically. The
symbol
will go off and power setting 9 will be reset.
Please note:
Press the respective
sensor field
to prematurely switch off the
power boost setting.
Power management
For technical reasons two cooking zones always comprise a module and
have a maximum power level.
If this power range is exceeded when a higher power setting level or the
power boost function is switched on the power management system will
reduce the power setting of the corresponding cooking zone of the module.
The display for this cooking zone will initially blink, after which the highest-
possible power setting will be consistently displayed.
blinking
lit
Modules (power management)
