Operation
GB
29
Automatic boost function
Parboiling takes place at power level 9 with the automatic boost function.
After a certain time the power level will switch down automatically to a lower
simmering setting (1 to 8).
When using the automatic boost function only the simmering setting with
which the food is to be cooked through needs to be selected since the elec-
tronic unit switches down automatically.
The automatic boost function is suitable for dishes which are cold initially and
are then heated up at high power. These dishes do not need to be constantly
monitored when simmering (e.g. boiling meat for soups).
1. Switch on the hob.
2. Press the
sensor field
and keep it pressed (for approx. 3
seconds)
to activate the function and immediately select a specific sim-
mering setting:
........ left...........................simmering setting 1
........ center......................simmering setting 4
........ right.........................simmering setting 8
The symbol “A” will light up. This will activate the automatic boost func-
tion. A and the selected simmering setting will blink alternately.
3. The automatic boost function will operate as programmed. After a certain
time (see chart) the cooking process will be continued with the simmering
setting. The A symbol will go off.
Notes
• The simmering setting can be raised while the automatic boost function is
in operation. A reduction in the simmering setting will switch off the auto-
matic boost function.
Melting function
For melting ingredients such as chocolate. The respective cooking zone is
operated at a low power level.
1. Switch on the hob.
2. Press the
melting function key
once. The symbol
will blink for
approx. 5 seconds.
3. Then press the respective
sensor field
to allocate it to a spe-
cific cooking zone.
The symbol
is shown; the melting function has been activated.
4. To switch off the function press the
sensor field
on the far
left.
The melting setting is available for 120 minutes, after which the cooking zone
is switched off.
Press and keep pressed (for approx. 3 seconds)
Power setting
Automatic boost function
Time (min:sec)
1
2
3
4
5
6
7
8
9
0:40
1:12
2:00
2:56
4:16
7:12
2:00
3:12
-
blinking
lit
