Kuppersberg GS 6057, Руководство пользователя

Страница: 53 / 120

53
ENGLISH TECHNICAL PASSPORT
Dishwasher
В. Loading the Salt into the
Softener
Always use salt intended for use with
dishwasher.
NOTE: If your model has no water
softener, you may skip this section
WATER SOFTENER
The hardness of the water varies from
place to place. If hard water is used in
the dishwasher, deposits will form on
the dishes and utensils.
The appliance is equipped with a special
softener that uses salts specifically
designed to eliminate lime and minerals
from the water.
Â
The salt container is located
beneath the lower basket and should
be filled as follows:
Attention!
Â
Only use salt specifically designed
for use in dishwashers! All other types
of salt not specifically designed for
use in a dishwasher, especially table
salt, will damage the water softener. In
case of damages caused by the use of
unsuitable salt the manufacturer does
not give any warranty nor is liable for
any caused damages.
Â
Only fill with salt just before
starting one of the complete washing
programmes.
Â
This will prevent any grains of
salt or salty water, which may have been
split, remaining on the bottom of the
machine for any period of time, which
may cause corrosion.
Â
After the first wash cycle the
control panel light expires.
1
2
A. Remove the lower basket and then
unscrew and remove the cap from the
salt container.
B. If you are filling the container for
the first time, fill 2/3 of its volume with
water (around 500ml).
C. Place the end of the funnel (supplied)
into the hole and introduce about 1.2kg
of salt. It is
normal for a small amount of water to
come out of the salt container.
D. Carefully screw the cap back on.
E. Usually, the salt warning light will be
off in 2-6 days after the salt container is
filled with salt.
NOTE:
1. The salt container must be refilled
when the salt warning light in the
control panel comes on. Though the salt
container is filled enough, the indicator
light may not black out before the salt