Kuppersberg GL4505, Технический паспорт

Страница: 13 / 44

13
english Technical passporT
dishwasher
If the inlet hose has a transparent coating,
periodically check if the colour intensifi es
locally. If yes, the hose may have a leak and
should be replaced.
For water stop hoses: check the small safety
valve inspection window (see arrow). If it is red,
the water stop function was triggered, and the
hose must be replaced by a new one.
For unscrewing this hose, press the release
button while unscrewing the hose.
CLEANING THE WATER INLET HOSE
If the water hoses are new or have not been
used for an extended period of time, let the
water run to make sure it is clear and free of
impurities before performing the necessary
connections. If this precaution is not taken, the
water inlet could become blocked and damage
the dishwasher.
CLEANING THE FILTER A SSEMBLY
Regularly clean the fi lter assembly so that
the fi lters do not clog and that the waste water
fl ows away correctly.
The fi lter assembly consists of three fi lters
which remove food residues from the washing
water and then recirculate the water. They
must be cleaned if you wish to achieve the
best results in every wash.
After several washes, check the fi lter
assembly and if necessary clean it thoroughly
under running water, using a non-metallic
brush and following the instructions below:
1. Turn the cylindrical fi lter A in an anti-
clockwise direction and pull it out.
PREVENTING UNPLEASANT ODOURS
Always keep the door of the appliance ajar
in order to avoid moisture from forming and
being trapped inside the machine.
Clean the seals around the door and
detergent dispensers regularly using a damp
sponge. This will avoid food becoming trapped
in the seals, which is the main cause behind
the formation of unpleasant odours.
CHEKING THE WATER SUPPLY HOSE
Check the inlet hose regularly for brittleness
and cracks. If damaged, replace it by a new
hose available through our After-Sales Service
or your specialist dealer.
Depending on the hose type:
CLEANING THE DISHWASHER
Any marks on the inside of the appliance
may be removed using a cloth dampened with
water and a little vinegar.
The external surfaces of the machine and
the control panel can be cleaned using a non-
abrasive cloth which has been dampened with
water. Do not use solvents or abrasive products.