16
17
KWM5315
EN
washing machine
Drain Hose
Warning!
• Do not kink or protract the drain hose.
• Position the drain hose properly, otherwise damage might result
due to water leakage.
There are two ways to place the end of drain hose:
1.
Put it into the water trough
2.
Connect it to the branch
drainpipe of the trough.
Water trough
Note!
• If the machine has a drain hose support, please install it as follows.
Trough
Hose
retainer
Bind
Warning!
• When installing the drain hose, fix it properly with a rope.
• If the drain hose is too long, do not force it into the washing machine
as it will cause abnormal noises.
Quick Start
Caution!
• Before using the washing machine, please make sure it's installed
properly.
• Before using the washing machine for the first time, run it for one
cycle without the clothes inside.
Before Washing
Main wash
Softener
Prewash
Plug in
Open tap
Load
Close door
Add
detergent
Note!
• Detergent must be added to “Compartment I” after selecting pre-
washing for washing machines with this function.
Washing
Washing
Select
Programme
Select function
or default
Start up
Note!
• If the default setting is selected, step 2 can be skipped.
• The function button line chart is for reference only, please refer to
the real product as standard.
After Washing
When the cycle finishes, the door lock and the “Start/Pause” lights
will flash, and you will hear a buzz sound, or you will see two small
flashes on the display.
Before Each Washing
• The working condition of the washing machine should be (0-40)° C. If
used under 0° C, the inlet valve and draining system may be damaged.
If the washing machine is worked at 0° C or less, then it should be
transferred to a room with a normal room temperature to ensure the
water supply hose and drain hose are not frozen before use.
• Please check the labels and the instructions on how to use the
detergent before wash. Use non-foaming or less-foaming detergent
suitable for machine washing properly.
