16
17
Warnings
1.
The ceramic hob must be installed by qualified personnel or
technicians. We have professionals at your service. never install
by yourself.
2.
The ceramic cooker hob must not be installed next to cooling
equipment, dishwashers and tumble dryers.
3.
The ceramic cooker hob must be installed to guarantee optimum
heat radiation, thereby increasing its reliability.
4.
The wall and heating zone above the worktop must be heat
resistant.
5.
To avoid damage, the laminate and adhesive layers must be heat
resistant.
6.
Do not use steam cleaners.
7.
This ceramic hob must only be connected only to a power supply
with an impedance of no more than 0.427 ohm. If necessary, please
consult your power supplier for system impedance information.
connecting the hob to the mains
power supply
The power supply should be connected in compliance with the re-
levant standard, or to a single-pole circuit breaker. The connecting
method is shown below.
Placa-Vitro-KVH2160-Manual-2.indd 16
16/04/10 20:13
220-240V~
Black
Brown
Grey
Blue
Y
ellow/Green
Input
Power Cord
L
N
220-240V~
220-240V~
400V~
Black
Brown
Grey
Blue
Y
ellow/Green
Input
Power Cord
L1 L2
N
Input
Power Cord
220-240V~
Black
Brown
Grey
Blue
Y
ellow/Green
220-240V~
L1 L2 N1 N2
Input
Power Cord
400V~
Black
Brown
Grey
Blue
Y
ellow/Green
L1
L2
