Kumpan electric 1950 Pure, Руководство пользователя

Страница: 46 / 62

Operation/Driving
Start the engine
(1950 Pure & 1950 Urban)
: Throttle driving mode:
(1950 Urban)
:
Press the power button facing the
frontal wheel once for ca. 2 seconds
(see p.36)
Pay attention to the charging sta-
tus on the control panel. At a short
time after you have pressed the main
switch, the display will lighten and
show the actual battery status.
Now your Kumpan is ready to start.
When starting to drive, the main
stand has to be lifted up. Make sure
that it’s completely locked.
When driving in the throttle mode
(only at the kickboard model 1950
Urban), first you have to switch the
function on (see the illustration at
page 35). Position the switch on the
throttle mode “I” (On).
ON/OFF
Run in
(1950 Pure & 1950 Urban)
:
Avoid instantaneous and prolonged
braking until your mileage reaches 10
miles.
Perform repetitive soft decelerations,
when using the vehicle for the first
time.
The braking pads have to run in first,
in order for the friction values to get
at its optimal level.