Kuhnke KUAX 680C, Инструкция по эксплуатации

Страница: 54 / 180

3 - 34
I/O configuration
3.8.2.1. The KUBES Module Configurator
Enter the inputs and outputs that the device is equipped with
into the Module Configurator as required when writing your
project under KUBES (see KUBES, Main menu, command
"Configuration 680" of the "Edit" menu). The Configurator
shows 8 slots. In the KUAX 680C, slots 4 to 7 are reserved for
the internal configuration. The entries for slots 4 and 5 cannot
be changed. The entries for slots 6 and 7 stand for the internal
inputs and outputs. Enter I/O modules of the same configura-
tion. You can change these entries so that you can also work
with devices providing a different basic configuration (e.g. 16
inputs, 8 outputs).
The information entered for slots 6 and 7 must correspond to the
number of internal digital inputs and outputs. Ohterwise, these
cannot be addressed via the program.