8. - Instructions for work
GMD 3150/3550/4050 TL CE
35
7N136AGB-A
Disk mower
8. Instructions for work
8.1
Putting the machine into work
position
From the transport position:
- Perform safety shutdown procedure.
- Fold both side guard rails down.
- Open drawbar swing cylinder lock valve.
- Open the mowing unit lift cylinder lock valves.
-
Operate drawbar swing cylinder to put the
drawbar in working position.
- Lower the mowing unit using the machine lift
cylinders.
The machine is in working position.
Before placing the machine in working
position:
- Check that nobody is within the
machine pivoting area.
- If there is someone, make sure the
person moves away.
Opened position (A).
Closed position (B).
Wait until cylinder is fully extended.
A
B
