KUHN FC313 RF, Руководство оператора

Страница: 43 / 72

Instructions for work
Mower conditioner
FC313 RF
41
Conditioning intensity
Conditioning intensity is determined by the pressure
exerted by the two rollers.
The pressure can be adjusted from 0 to
5 daN/cm (0 à 25 lbf/in).
- Tighten nut (1) to increase the conditioning
intensity. The maximum conditioning intensity is
obtained when spacer (2) comes into contact with
support (3).
- Loosen nut (1) to reduce the conditioning
intensity. Make sure to keep a minimum distance L of
approx. 5 mm (0.20’’).
Bad parallelism and roller play
Stop (1) located on each side of the conditioner are
factory set to ensure the parallelism and minimum roller
play.
Before adjusting, maintaining or repairing
the machine, turn off ignition key and wait
until all moving parts have come to a
complete stop.
The pressure is factory set at
2.5 daN/cm 12.5 lbf/in).
1
2
3
L
Screw (1) and counter-nut (2) are coated with
Loctite 601 when fitted.
2
1