KUHN FC2860 TLR, Руководство оператора

Страница: 59 / 116

8. - Instructions for work
FC2860-3160-3560 TLR/TLS
59
KN282CGB_A
Mower conditioner
The maximum cutting height L1 = 85 mm (3.3’’)
is obtained when the disks are parallel to the
ground.
The minimum height must not be below L2 =
25 mm (0.98’’).
Too low a cutting height can lead to:
• Excessive disc and knife wear.
• Crop being contaminated by soil.
• Delay in regrowth.
8.2.2 Ground pressure
The ground pressure is adjusted independently
on each side of the mower unit.

To check the ground pressure:
- Check that the hitch pins are at the proper height
H = 650 mm (26’’).
- Raise the mowing unit:
• The force F must be of approximately 60 daN
(135 lbf) on each side.
The pressure must be adapted to the nature and
moisture degree of the ground.

To adjust the suspension
- Raise the mowing unit for easier ground
pressure adjustment.
L1
L2
F
H