KUHN FC2860 TLR Скачать руководство пользователя страница 23

Страница: 23 / 116

4. - Safety

FC2860-3160-3560 TLR/TLS

KN282CGB_A

Mower conditioner

4.2.16 Projection of stones and foreign

objects

- For driver safety, always use a tractor equipped

with a cab.

- Keep the ground to be mown or shredded free

from foreign objects.

- Avoid using the shredder on stony or rocky ground.

If this is not possible, take extra safety precautions,
such as:

- Fit polycarbonate screens inside the tractor cab's

side and rear windows, or install narrow mesh
guards on their exterior.

- Increase the cutting height to avoid contact with

stones or rocks.

- Even when the machine is used in accordance

with its purpose, objects may be projected. Stones
and other foreign objects projected by the moving
parts can travel a considerable distance. Keep all
persons and animals away from the danger zone.

- Guards on the machine help reduce the risks of

projection. Therefore, make sure that all mower
protection devices are in place and good condition
prior to using the machine.

- Check the guards regularly. Immediately replace

any damaged or missing protection.

Содержание FC2860 TLR





















































































































Результаты поиска

Содержание FC2860 TLR

Отзывы:

Похожие инструкции для FC2860 TLR

Бренды по названию

Популярные бренды

KUHN FC2860 TLR, Руководство оператора

Результаты поиска

Содержание FC2860 TLR

Отзывы:

Похожие инструкции для FC2860 TLR

Бренды по названию

Популярные бренды